Can you believe someone at online casino asked me are you from myrulet.com?
FFA cant’ do it because it needs to wait for rotor to come to particular position and there is not much time. Even with half rotor clocking it was too late.
FFZ which can clock rotor at any place and also 1/2 of rotor was ok, but also many times NMB
Then i used FFZ’s timer, set it to 1.8s and played VB2
It worked the best.
FFZ i used is my testing unit it also beeps, as on some videos I published
Theoretically I should be more accurate with FFZ/FFV but because of bad video quality i believe VB2 was better .
FFZ timers set to 1.8s
In that time reference for rotor was ~9 pockets ,¼ of rotation
Applied time at 5 o’clock diamond
Offset 0.
So for Jefra
This is how to do it
Apply 1.8stime to clock rotor, check how many pockets difference form ¼rotor makes,
For each pocket extra that rotor makes you add 4-5 pockets extra in ball direction to clocking point for ball. Adding 4 is easy because you can look ¼ of the wheel as a full rotation of 37 pockets. For example in ref time of 1.8s rotor made ¼ +1/8 of wheel, so extra 1/8 is in middle of another 1/4 of wheel, it means add to 5 o’clock 18 pockets. (1/8 x 4=1/2=18 pockets)
